Fifi Clitoral Vibrator

Discover a new concept. Did you think you had seen it all? Nalone hides more than meets the eye; at first glance, a normal vibrator, but inside lies cutting-edge technology at the service of pleasure.

Meet Fifi, an external clitoral stimulator that will make this toy a perfect ally for your pleasure. It is ergonomically designed for maximum contact with the clitoris and will transmit strong oscillating vibrations to your body.

The silicone it is made of is safe and ensures perfect stimulation.

Specifications:

• Material: Silicone and ABS
• Vibration modes: 7 sound-activated vibration modes
• Maximum noise level: less than 50 dB
• Dimensions: 92 mm (L) x 51 mm (W)
• Charging: Lithium battery (USB charging cable included)
• 100% waterproof

① Vibrating tip ② accessory connection cable ③ Vibrating tip ④ Vibrating tip ⑤ Accessory On/Off/cycle vibration mode ⑦ accessory connector ⑥ Fi Fi On/Off/cycle vibration mode ⑧ Charging port

Stimulation modes

• 1. Slow vibration
• 2. Medium vibration
• 3. Fast vibration
• 4. Medium pulse vibration
• 5. Fast pulse vibration
• 6. 2 short and 1 long vibration
• 7. Gradual pulse vibration

How to use

• 1. To charge your vibrator, connect the USB charging cable to a USB adapter (a 5V/1A adapter is recommended). Connect the other end of the USB cable to the base of the vibrator (on the bottom of the vibrator). While charging, a blue light on the control panel will flash to indicate that charging is in progress. Once charged, the light will stop flashing to indicate that it is ready for use. Please note that the first time you use it, or if you have not used it for a long time, the light may not turn on for a few minutes.
• 2. To turn on the vibrator, press and hold the button for 3 seconds.
• 3. If you quickly press the button, the vibrator will enter manual mode. Each time you press the “” button, it will change the vibration mode, cycling through all of them.
• 4. To turn off the vibrator, press and hold the “ ” button for 3 seconds.
• 5. To use the FiFi 2 accessory, connect the accessory to the base of FIFI 2 (Specification - Point 6). If you quickly press the “ ” button, the vibrator will enter manual mode. Each time you press the “ ” button, it will change the vibration mode, cycling through all of them.
• 7. To turn off the vibrator, press and hold the button for 3 seconds.

Warnings

1. ◆ Make sure to fully charge the vibrator before use.
2. ◆ Clean/disinfect your vibrator with warm water and antibacterial soap.
3. ◆ Only use water-based lubricants. Never use massage oils, hand creams, or other types of lubricant.
4. ◆ After use, it is recommended to clean the vibrator to prevent bacterial growth.